Setup and Info Page

Important! The information provided in this video is for general guidance only. The information is provided on "AS IS" basis, with no guarantee of completeness, accuracy or timeliness, and without warranty or representations of any kind, expressed or implied. In no event will CloudEndure and/or its subsidiaries and/or their employees or service providers be liable to you or anyone else for any decision made or action taken in reliance on the information provided above or for any direct, indirect, consequential, special or similar damages (including any kind of loss), even if advised of the possibility of such damages. CloudEndure is not responsible for the update, validation or support of sample videos.

The Setup and Info page enables you to view important information about your ProjectsA Project is the basic organizational unit for running a CloudEndure solution., and to define the replication and notification settings of a selected ProjectA Project is the basic organizational unit for running a CloudEndure solution..

This page consists of the several tabs – LICENSES, CREDENTIALS, REPLICATION SETTINGS, and OTHER SETTINGS.

LICENSES Tab

The LICENSES tab provides you with information about the License PackageIncludes the licenses that are required for installing Agents on your Source machines. and licenses that are associated with the selected ProjectA Project is the basic organizational unit for running a CloudEndure solution..

For more information about the LICENSES tab, see the License Packages section.

CREDENTIALS Tab

The CREDENTIALS tab allows you to enter your cloud credentials into the CloudEndure solution.

These credentials are required by CloudEndure in order to create, manage, and delete resources on the AWS cloud.

REPLICATION SETTINGS Tab

The REPLICATION SETTINGS tab allows you to define your SourceThe location of the Source machine; Currently either a specific Region or Other Infrastructure. and TargetThe location where the Replication Server will be located and where Target machines will be created (as a result of Test, Cutover or Recovery). infrastructures and regions, and to configure the settings of the Replication ServersThe CloudEndure Machine to which Staging Disks are attached and to which data is replicated; launched on the Target location. that are launched in the Staging AreaA part of the Target location; includes the Replication Servers’ subnet, IPs, and the Replication Servers and their disks. of the AWS cloud. These settings will apply to all newly installed machines.

The options that appear on the REPLICATION SETTINGS tab change according to your selected TargetThe location where the Replication Server will be located and where Target machines will be created (as a result of Test, Cutover or Recovery). infrastructure.

OTHER SETTINGS Tab

The OTHER SETTINGS tab enables you to define or change some of the ProjectA Project is the basic organizational unit for running a CloudEndure solution. settings.

This tab allows you to perform the following:

• Renaming the Project – change the name of the selected ProjectA Project is the basic organizational unit for running a CloudEndure solution..
• Setting email notifications – enable built-in email alerts. Email notifications are gathered and sent to each User for each individual ProjectA Project is the basic organizational unit for running a CloudEndure solution. based on selected settings. The notifications are are automatically triggered by common events in the ProjectA Project is the basic organizational unit for running a CloudEndure solution. that may prevent you from meeting your MigrationThe CloudEndure solution that allows you to move data, applications, and other business elements from an onsite network or a cloud environment to another physical location or cloud environment./ Disaster RecoveryThe CloudEndure solution that enables the recovery or continuation of vital technology infrastructure and systems in case of a crippling event. objectives. The following are our email alerts:
  • LicenseAllows the installation of the Agent on one machine. One License enables one Agent. Licenses are a part of the License Package. Expiration - Receive a single notification 30 days prior to the expiration of the CloudEndure LicenseAllows the installation of the Agent on one machine. One License enables one Agent. Licenses are a part of the License Package. associated with the ProjectA Project is the basic organizational unit for running a CloudEndure solution..
  • LagA delay between the changes that occur on the Source and the replication of that changes to the Target. Lag appears when replication does not occur for a certain period of time. Exceeds Threshold - Receive a notification when Data ReplicationThe process of copying all data blocks from selected disks on a Source Machine to Staging Disks. lagA delay between the changes that occur on the Source and the replication of that changes to the Target. Lag appears when replication does not occur for a certain period of time. (RPOA metric indicating of the amount of data at risk of being lost. Determined by the amount of time between data protection events and reflects the amount of data that potentially could be lost during a disaster recovery. The maximum targeted period in which data might be lost from an IT service due to a major incident.) for a Machine exceeds preset threshold.
  • LagA delay between the changes that occur on the Source and the replication of that changes to the Target. Lag appears when replication does not occur for a certain period of time. No Longer Exceeds Threshold - Receive a notification when the previously noted Data ReplicationThe process of copying all data blocks from selected disks on a Source Machine to Staging Disks. (RPOA metric indicating of the amount of data at risk of being lost. Determined by the amount of time between data protection events and reflects the amount of data that potentially could be lost during a disaster recovery. The maximum targeted period in which data might be lost from an IT service due to a major incident.) lagA delay between the changes that occur on the Source and the replication of that changes to the Target. Lag appears when replication does not occur for a certain period of time. no longer exceeds the threshold.
  • Replication Stalled - Receive a notification when Data ReplicationThe process of copying all data blocks from selected disks on a Source Machine to Staging Disks. for a machineA physical or virtual computer. becomes completely stalled.
  • Replication No Longer Stalled - Receive a notification when a machineA physical or virtual computer. for which Data ReplicationThe process of copying all data blocks from selected disks on a Source Machine to Staging Disks. was previously stalled, is no longer stalled.
  • Machines Not Tested - Receive a notification if a machineA physical or virtual computer. has not been tested.
  • 
    
    
• Locating and re-generating the Installation Token – find the Installation Token of the selected ProjectA Project is the basic organizational unit for running a CloudEndure solution., and create a new token if necessary.
  
  
• Locating and generating/re-generating the API Token - you can use the API Token to sign in (rather than your username and password) when making API calls. Click on GENERATE NEW TOKEN to generate a new API Token.
  
  Click on REGENERATE TOKEN to re-generate an API Token.