Step 5: Failed to authenticate the replication server with the CloudEndure Service Manager

Important! The information provided in this section is for general Troubleshooting guidance only. The information is provided on "AS IS" basis, with no guarantee of completeness, accuracy or timeliness, and without warranty or representations of any kind, expressed or implied. In no event will CloudEndure and/or its subsidiaries and/or their employees or service providers be liable to you or anyone else for any decision made or action taken in reliance on the information provided above or for any direct, indirect, consequential, special or similar damages (including any kind of loss), even if advised of the possibility of such damages. CloudEndure is not responsible for the update, validation or support of troubleshooting information.

Possible causes for failure

1. https://console.cloudendure.com/ not reachable via TCP Port 443 by the Replication ServerThe CloudEndure Machine to which Staging Disks are attached and to which data is replicated; launched on the Target location.. Check the subnet you selected in Setup & Info > Replication Settings and ensure that TCP Port 443 is open from your Replication ServerThe CloudEndure Machine to which Staging Disks are attached and to which data is replicated; launched on the Target location..
   
   To verify the integrity of the connection from the Replication ServerThe CloudEndure Machine to which Staging Disks are attached and to which data is replicated; launched on the Target location. to the CloudEndure Service ManagerThe CloudEndure server. over TCP Port 443:

1. Launch a vanilla Ubuntu machineA physical or virtual computer. in the default subnet of the default VPC in the same subnet that was selected in the Replication SettingsIn the Console UI, a set of settings affecting the data replication process, including Replication Servers subnet and IP, data throttling, use dedicated replicator, use multiple connections, etc. screen are running.
2. On the machineA physical or virtual computer., run the following command:
   wget https://console.cloudendure.com/ (most platforms)
   
3. If the command fails, then there is a connectivity problem.